Casa PescaraKitchen · 3 min
Renovating a kitchen in Pescara while keeping the layout
Find out how to update cabinets, worktops and finishes around the existing connections.
Map the fixed points
If the kitchen will stay in the same layout, start with the water supply and waste, then review power, sockets and extraction with the person carrying out the survey. Mark their positions against the planned finished floor and worktop heights. The sink cabinet can occupy the same stretch of wall and still interfere with existing plumbing if its drawers are deeper or if it has a pull-out waste bin. Ask the cabinet supplier to show you the inside of that unit. Knowing where the crosspieces, rear panel and service openings are located makes it possible to choose a compatible cabinet before the order goes through.
Check what a new cabinet changes
New base units can stand where the old ones did while changing several important heights. Compare plinth height, worktop thickness, usable depth and the underside of wall cabinets. Look for a projecting window sill and check whether the window will clear the tap. A dishwasher may need accessible connections and clearance in specific places, so use the installation drawings for the actual model. Check how its door moves once the decorative panel is fitted, especially beside a wall or tall cabinet. A drawing with vertical measurements shows conflicts a floor plan can miss. It also gives the fitter a clear reference for the work.
Decide which parts are worth keeping
For every appliance you want to retain, record the model and photograph its identification plate, connections and accessories. Ask the installer to assess its condition and check the clearance, ventilation and space available in the new unit. If the worktop is staying, have its edges, holes, joins and fixings examined before removal. Agree how anything taken out will be wrapped and stored. For retained cabinets, check that hinges, runners and lower panels are sound and dry. Reuse is easier to plan when the items are in good condition and their dimensions are known. Have a replacement in mind for any part that could reveal damage after removal.
Work through the joins between old and new
Removing a base cabinet can uncover a strip of bare floor, a socket behind the back panel or a wall that changes thickness along its length. Ask which repairs are included and when they can be measured. If the floor is staying, compare the footprint of the old kitchen with the footprint of the proposed one. The line of the plinth, position of end panels and depth of the units affect what you see from the doorway. In a room open to the living area, inspect the junctions from that side as well. Sketch any sections that will be uncovered so that finishes, materials and responsibilities can be agreed in advance.
Make room for decisions after removal
List the details that can only be confirmed once the old kitchen has been taken out. For each one, discuss an option that keeps the layout and a fallback if site conditions differ. A shut-off valve, for example, may need an access opening somewhere other than the one on the first drawing. For an occupied flat in Pescara, work out when you will be without the sink or hob and ask when those facilities can be used again. Ask the person coordinating the work to record any revised decisions on the latest drawing and in the scope so that everyone has the same reference when fitting begins.
